Products

This is a 3V active GPS antenna intended for use with the GPSDO kit used with the USRP N200/N210 Series. The antenna can also be used for the USRP E310, which has an integrated GPS(SMA to SMB adapter needed).  A GPSDO locked to the GPS constellation can provide time synchronization within 50 ns of the global GPS standard and very...

SMB Female to SMA Female 0.1m cable. Can be used to connect SMA equipment to the USRP E310 RF connectors. Product Photos Connector view

SMB Female to SMA Female adapter. Can be used to connect SMA equipment to the USRP E310 RF connectors. Product Photos: Adapter at different angles  

Features: Wide frequency range: 70 MHz – 6 GHz Up to 56 MHz of instantaneous bandwidth 2×2 MIMO transceiver RX, TX filter banks Xilinx Zynq 7020 SoC: 7 Series FPGA with ARM Cortex A9 866 MHz dual-core processor Up to 10 MS/s sample data transfer rate to ARM processor Synchronization with PPS time reference Integrated...

This is a GPS-disciplined, temperature-controlled crystal oscillator (GPSDO), which is recommended for use with a USRP B200/B210.  The GPSDO provides a high-accuracy 10 MHz reference and 1 PPS signal, which allows developers to build systems that serve applications with improved frequency accuracy (75 ppb in unlocked condition) or global timing alignment (50 ns in locked...

This is a 5V active GPS antenna intended for use with the Board-Mounted GPSDO (OCXO) or Board-Mounted GPSDO (TCXO).  A GPSDO locked to the GPS constellation can provide time synchronization within 50 ns of the global GPS standard and very high clock accuracy.  

Features: Two wide-bandwidth RF daughterboard slots Up to 160MHz bandwidth each (wideband versions of CBX, WBX, SBX) Daughterboard selection covers DC to 6 GHz Large customizable Xilinx Kintex-7 FPGA for high performance DSP (XC7K410T) Multiple high-speed interfaces Dual 10 Gigabit Ethernet – 2x RX at 200 MSps per channel Dual 10 Gigabit Ethernet – 4x...