10 Gigabit Ethernet Cable w/ SFP+ Terminations (0.5 Meter)

10 Gigabit Ethernet Cable w/ SFP+ Terminations

The 0.5 m 10 Gigabit Ethernet (GigE) cable is recommended for USRP™ devices with daisy-chainable 10 GigE interfaces.  It provides the same connectivity as longer cables, but in a more convenient length appropriate for rack-mount systems.   Kit Contents: 0.5 m 10 Gigabit Ethernet Cable Recommended for Use With: Rack-mount or multi-unit configurations using USRP...

10 Gigabit Ethernet Card for Desktop

The 10 Gigabit Ethernet Connectivity adapter card provides high-speed network connectivity between a PC and a USRP X300/310.  The kit includes a PCI-Express adapter card with two SFP+ ports.  When paired with USRP X300 or X310, this connectivity kit can stream up to 200 MS/s of RX streaming bandwidth.  The 10 Gigabit Ethernet adapter card...

PCI-Express Connectivity Kit (PCIe – Desktop)

The PCI-Express Connectivity Kit provides high-speed connectivity between a desktop PC (with an available PCI-Express x4 slot) to the USRP ™ X300/X310.  The kit includes a PCI-Express x4 adapter card and 3.0m cable.  The cabled PCIe bus interface provides up to 200 MS/s of full duplex data throughput with round-trip latencies as low as 10...

USRP B210 (Board Only)

Features: First fully integrated, two-channel USRP device with continuous RF coverage from 70 MHz – 6 GHz Full duplex, MIMO (2 Tx & 2 Rx) operation with up to 56 MHz of real-time bandwidth (61.44MS/s quadrature) Fast and convenient SuperSpeed USB 3.0 connectivity GNURadio and OpenBTS support through the open-source USRP Hardware Driver™ (UHD) Open...

USRP B200 (Board Only)

Features: The first fully integrated USRP device with continuous RF coverage from 70 MHz –6 GHz Full duplex operation with up to 56 MHz of real time bandwidth (61.44MS/s quadrature) Fast and convenient bus-powered connectivity using SuperSpeed USB 3.0 GNURadio and OpenBTS support through the open-source USRP Hardware Driver™ (UHD) Open and reconfigurable Spartan 6...

OctoClock-G CDA-2990

NI CDA 2990 Octoclock

Fully Integrated Timing Source with 8-Way Distribution (10 MHz and 1 PPS) Convenient Solution for Multi-Channel Synchronization Use with MIMO Capable N-Series Devices for Coherent System User Selection between Internal GPSDO Or External 10 MHz/1 PPS Source Source detection with automatic switch over in case of failure or disconnect 19″ Rackmount – 1U Locking Power...

OctoClock CDA-2990

NI CDA 2990 Octoclock

  Note: The OctoClock CDA-2990 model shown on this page does NOT include an internal 10 MHz/1 PPS source.  An external, source must be used to generate and distribute 10 MHz/1 PPS signals with this product.  See the OctoClock-G CDA 2990 for a fully integrated solution with an internal GPSDO. 8-Way Time and Frequency Distribution (1...