OctoClock-G - $1,643.00 782979-01 | OCTOCLOCK 8-CHANNEL CLOCK DISTRIBUTION MODULE W/ INTEGRATED GPSDO
The OctoClock-G is an upgraded version of the OctoClock, which includes an internal GPS-disciplned, over-controlled crystal oscillator. Like the OctoClock, the OctoClock-G provides 8 PPS and 10 MHz outputs.
OctoClock - $924.00
782978-01 | OCTOCLOCK 8 CHANNEL CLOCK DISTRIBUTION MODULE (External Reference Required)
The OctoClock is an affordable solution for high-accuracy time and frequency reference distribution. The OctoClock accepts 10 MHz and PPS signals from an external source, and distributed each signal 8 ways. This is a useful accessory for users that would like to build multi-channel systems that are synchronized to a common timing source.
Requires external 10 MHz/1 PPS source.
GPSDO Kit for USRP N200/N210 and E100/E110 - $771.00 782779-01 | USRP GPS-Disciplined Oscillator Kit
Includes GPS locked reference oscillator for USRP N200/N210 series (rev 2, 3, 4 and above) and USRP E100/E110 (rev 4 and above) series only. Kit includes 1 power cable, 3 serial cables (only one shown in picture), 3 RF cables and 2 screws required to install inside the USRP N200/E100 series chassis. For applications requiring the use of an active GPS antenna, this module requires a 3V LNA compatible GPS antenna (not provided).
Board Mounted GPSDO (OCXO) Recommended for USRP X300/X310 - $976.00 783173-01 | GPSDO for USRP X Series (PCB-Mounted GPS-Disciplined OCXO)
This is a GPS-disciplined, oven-controlled crystal oscillator (GPSDO), which is compatible with a USRP X300 or X310. The GPSDO provides a high-accuracy 10 MHz reference and 1 PPS signal. This allows developers to build system that serve applications with tight synchronization requirements, or global timing alignment within 50 ns.
Board Mounted GPSDO (TCXO) Recommended for USRP B200/B210 - $636.00 783454-01 | BOARD MOUNTED GPSDO KIT (PCB-MOUNTED GPS-DISCILPINED TCXO)
This is a GPS-disciplined, temperature-controlled crystal oscillator (GPSDO), which is recommended for use with a USRP B200/B210. The GPSDO provides a high-accuracy 10 MHz reference and 1 PPS signal, which allows developers to build systems that serve applications with improved frequency accuracy (75 ppb in unlocked condition) or global timing alignment (50 ns in locked condition).
USRP X300/X310 Rackmount Assembly - $280.00
783196-01 | USRP X3xx 1U Rack Mount
The 1U rackmount assembly allows users to conveniently mount select USRP devices in a compact 1U form factor. When combined with the rack-mount enclosure, it is easy to build compact, high-channel-count systems. This product is compatible with the USRP X300 and USRP X310 and allows users to integrate four complete RF channels per 1U.
Enclosure Kit for USRP B200/B210 - $75.00 784190-01 | Steel Enclosure Accessory for USRP B200/B210 (Green PCB Only)
This enclosure kit allows users to assemble a steel case to protect the board-only USRP B200 and B210 devices. K-Slots on the front and rear of the enclosure provide additional security. The enclosure only supports green USRP B200 and B210 devices with the USB-B connector (revision 6 or later).
10 Gigabit Ethernet Card for Desktop - $610.00 783345-01 | 10 Gigabit Ethernet PCIe Adapter Card for Desktop
The 10 Gigabit Ethernet Connectivity adapter card provides high-speed network connectivity between a PC and a USRP ™ X300/310. The kit includes a PCI-Express adapter card with two SFP+ ports. When paired with USRP ™ X300 or X310, this connectivity kit can stream up to 200 MS/s of full-duplex streaming bandwidth. The 10Gigabit Ethernet adapter card is plugged to the PCIe slot on a desktop and requires an SFP+ cable to be connected to the USRP X300/310.
PCI-Express Connectivity Kit (PCIe – Desktop) - $712.00
PCIe Interface Kit for USRP X3xx (Desktop)
The PCI-Express Connectivity Kit provides high-speed connectivity between a desktop PC (with an available PCI-Express x4 slot) to the USRP ™ X300/X310. The kit includes a PCI-Express x4 adapter card and 3.0m cable. The cabled PCIe bus interface provides up to 200 MS/s of full duplex data throughput with round-trip latencies as low as 10 us.
ExpressCard PCIe Interface Kit (Laptop) - $610.00 783347-01 | Express Card Interface Kit for USRP X3xx (Laptop)
The ExpressCard Connectivity Kit provides single-lane PCIe connectivity between a laptop PC (with an available ExpressCard slot) to the USRP X300/X310. The kit includes an ExpressCard adapter card and 2.0m cable. The cabled ExpressCard interface provides up to 50 MS/s of full duplex data throughput with round-trip latencies as low as 10 us.
GPIO Expansion Kit - $101.00 783348-01 | GPIO Connection Kit for USRP X300/X310
The USRP™ GPIO Expansion Kit allows users to access general-purpose input/output (GPIO) signals of select USRP devices. GPIO can be used for a variety purposes such as controlling external RF power amplifiers or generating and accepting trigger signals from test equipment.
International Power Cords for 12 V Power Supply - $36.00 783350-01 | International Power Cords for USRP X3xx Power Supply
This International Power Cord Kit allows the Universal 12 V power supply to be used out of the United States. There are three additional cords included – Australia, Europe, and the UK.